gconnor972
New member
changed the impeller still not pumping water. going to try and blow out the top end. any ideas would be appreciated
MarineEngine.com does not offer troubleshooting assistance or repair advice by email or by telephone.
You are invited to join our public Boat Repair Forum to seek assistance from other members.
You may also visit the Boat Motor Manuals section of our site to obtain a service manual.
There is no head gasket on this 9.8 Mercury !-------------Remove the back 4 nuts.------Then loosen the front 2 nuts and gently pry up on the studs to loosen the block.