MarineEngine.com does not offer troubleshooting assistance or repair advice by email or by telephone.
You are invited to join our public Boat Repair Forum to seek assistance from other members.
You may also visit the Boat Motor Manuals section of our site to obtain a service manual.
Now i have to do a link and sync , my problem Is my SELOC and CLYMER manual are both pretty vague, does anyone know of a video or a more detailed method is located?
also would your method with the w.o.t timing work with idle?
yea that makes sense , I just wanted to get everything good to go, lake isnt the closest and I read you shouldn't get the idle with the muffs on because there is no back pressure otherwise I would do it that way
ok so I tried setting the idle time by just cranking I have my idle screw completely bottomed out and still have to go back always yet , also I've been reading your cam follower should not be in constant contact but it appears that is how mine is constructed see attached photos, maybe I should just set the idle screw half way and adjust the cam followed accordingly and hope I can get the timing right on the lake with the idle screw
so when the cam is at the scribe mark the file timing should be right on