Na8en101
Regular Contributor
I recently refurbished my boat 1977 apollo 660 it was running fine with the muffs on , 1977 EVINRUDE 85 hp. Went to launch it yesterday, right next to my slip. The only way I could get it to run was with the warm up all the way up high rpm and slowly bring down. If I try to put it in idle to shift gears it dies almost instantly . I have replaced all the plugs all the lines, I made sure the gapping was right . Should I rebuild the carb? I have a kit coming on monday 8/19/20, is there anything I should check in the meantime? It has been quite some time since I've had engines with carbs , went from none to three in a week . And advice it help would be greatly appreciated
Last edited: