Seamullets
New member
Wanted to see if this sounds right, I changed all the filters and the oil in the BF135 and it was still going in slow mode, no alarm was going off. I took it to someone who supposedly had a computer and said he could test it. Turned out he lied and charged a thousand dollars to change the plugs and clean out the vapor canistor and put a fuel pump isolater and 7 or 8 o rings and sent the injectors to be cleaned. I finally got it back this past thursday, today would of been 2 weeks. We called him and told him it was still messing up and he tried lying his way out and told my wife there was an inch and a half of sand in my 12 gallon portable tank and there was not because i clean it out before i use it every time, Two of the injectors were bad according to the print out he showed us and had all 4 cleaned and the two bad ones fixed. Tried to go fishing so i could get back to work seeing how i hadnt been in almost 2 weeks because of the fella keeping it and not touching it till last monday. Yesterday we finally got it on a computer and it said the vtec solenoid was not opening and closing like it should, They said they were gonna see what they could find out, Mean time this morning i found the service manual for my 135 on line and downloaded it, turns out the 135 has the spool valve assembly and not the vtec solenoid. took it off and the screen was stopped up took it and cleaned it up and put it back and tried it was still making a noise and slow mode is still kicking in, came home and cleaned it again and ran it and still heard it, could hear the valve opening and closing but still heard the noise. took the inpection plate off the crank case cover and took the cam chain tensioner out and found it had 3 teeth that look like they are about wore off and that is where it sounded like the noise is coming from. Also the crankshaft pulley is rubbing the chain case cover and the cpk sensor. Any idea why it might be doing that? And How do you set the timing on this motor. Can't afford to take it to any body to leave it for them to work on, Gonna have to do it my self, and the green light comes on when you first crank it up and not sure how long its staying on when i ran it today on the water, but when i hooked up the flush and it idled it stayed on.