Hello folks, I have a 1995 Evinrude 115 that has run well for me all these years, it has about 700 hours on it. The last time I was out it was missing out at low speed but would still get up and plane. I assumed it was time for a new set of spark plugs. When I pulled the plugs at home I noticed one of them was way more crusty than the rest and there were water droplets all over the end of the plug, not gas but water!
I replaced the plugs anyway and fired it up. Same rough idle. Pulled the plugs and once again that same plug had water on it. I checked the spark with a spark test tool and it was good.
Any idea what may be going on with the water on the spark plug?
I replaced the plugs anyway and fired it up. Same rough idle. Pulled the plugs and once again that same plug had water on it. I checked the spark with a spark test tool and it was good.
Any idea what may be going on with the water on the spark plug?