Johnson - Collector
New member
Having problems finding pistons and rings for this particular engine I was hoping to use older or newer pistons my part number is obsolete someone said I could use pistons out of a 61 62
or 63 year model and install them in my engine with bigger rods I actually have some coming from eBay out of a 1952 model I figured that the bore and stroke for 10 hours would be the same all across the board so I don’t understand why there’s so many different part numbers for the pistons and rings has anyone had this problem and where did you go to get the parts. I noticed a piston available on a 1958 but then no rings for that one anyways I’m trying to restore it back to original condition any help will be greatly appreciated thanks again God bless
or 63 year model and install them in my engine with bigger rods I actually have some coming from eBay out of a 1952 model I figured that the bore and stroke for 10 hours would be the same all across the board so I don’t understand why there’s so many different part numbers for the pistons and rings has anyone had this problem and where did you go to get the parts. I noticed a piston available on a 1958 but then no rings for that one anyways I’m trying to restore it back to original condition any help will be greatly appreciated thanks again God bless