Logo
FULL SITE MENU

Search results

  1. D

    Evinrude shifting problems

    " Early '80's Evinrude " Early '80's Evinrude 15 hp Dean helped me out with my initial problem of not shifting. I lubed the rods as well as I could, and it now shifts. The problem is now it won't shift out of forward without moving the shifter lever in to reverse first. It shifts in and out of...
  2. D

    Evinrude 15 shifting problems

    " Dean helped me out with a sh " Dean helped me out with a shifting problem the other day. I lubed the linkage, and it now shifts. The problem now is when I shift out of forward I need to go in to reverse to get out of forward. It shifts in to and out of reverse fine. Is this an adjustment, and...
  3. D

    Evinrude shifting problems

    " I have an early '80' " I have an early '80's 15 hp Evinrude. Last year when I first took it out, it wouldn't shift properly. It felt like it was jammed when I tried to shift. I took it to the person I bought it from, and he fixed it. This year, it has the same problem, but he's no longer...
  4. D

    Question for Joe Reeves

    " Joe, I have read in your " Joe, I have read in your many post to check the no oil alarm on the VRO system just pinch off the oil supply line going to the VRO. I have a 1990 200hp Evinrude, powerhead just rebuilt, running oil in the tank as well. How long does it take to deplete the...
  5. D

    Joe Reeves HELP

    " Joe, This is Dennis, I e " Joe, This is Dennis, I emailed you on 4/6 I guess I shouldn't have sorry about that, I will post from now on. 1990 200hp Evinrude (New Rebuild) Anyway I am still having problems with that new powerpack. Here is what I have done to troubleshoot the...
  6. D

    Info for Sea Horse motor

    Model no. 70EL 78C. What inf Model no. 70EL 78C. What info can I get from the model no. What size motor is this? What year is it? What is the mixing ratio? What spark plug should I use? Anything else you can share that I'm not thinking to ask? Thanks
  7. D

    Question for Joe Reeves

    Joe Do you know the part Joe Do you know the part # for the Temp senser thats mounted on the head for a 1990 200hp Evinrude Model# E200TXES Serial# G02496101. Thanks Dennis
  8. D

    Need Evinrude Engine Cover

    Does anybody know where I can Does anybody know where I can find an engine cover for a 1990 200hp Evinrude outboard?
  9. D

    Joe Sparky Need Help

    " Joe, Sparky I am doing a " Joe, Sparky I am doing a rebuild on the powerhead of a 1990 200hp Evinrude. I am at the point where I am tiring to separate the lower unit from the mid section, you guessed it, seems to be stuck. All the bolts have been removed and the shift rod disconnected...
  10. D

    Question for Joe Evinrude

    " Hello Joe, 1990 200hp Eve " Hello Joe, 1990 200hp Evenrude Model# E200TXES Serial# G02496101. Is this engine a 60 degree or 90 degree, cross-flow or looper. Thanks Dennis "
  11. D

    Question for Andrew New Powerhead

    " Hello Andrew Joe told me " Hello Andrew Joe told me to check with you, I'm looking for a new or rebuilt powerhead for a 1990 200 Evinrude (Model# E200TXES Serial# G02496101). Need price and availability if this is something you stock. Thanks Dennis "
  12. D

    283 engine amp velvit drive transmission 11

    " Both turn key condition comp " Both turn key condition complete. both for $400.00 or $250.00 each . The engine is a 283c.i. ,185 h.p. flagship RH rotation.The transmission is a 1:1 ratio velvit drive with oil cooler. "
  13. D

    Proper fuel line for engine

    " Any one have the ABYC standa " Any one have the ABYC standards for fuel line types for inboard engine. Need to run new fuel line from the fuel pump to the carb. Should this be a solid line, rubber line or a combo of both? Copper,steel or aluminum ? This is using a mechanical pump. How...
  14. D

    Velvet drive 11

    " Me again '59 Owens .I go " Me again '59 Owens .I got the engine running great ,now the trany went out . I took it apart today and nothing fell out in pieces ,nothing seems to be worn that bad. The fluid was a little bit discolored but not really brown. What next ? Is there a way to check the...
  15. D

    Leaky shaft log

    I have a 1976 Luhrs with a si I have a 1976 Luhrs with a single engine and "v" drive trans. I a looking at having to repack my shaft log with new packing. I can get it to a slow drip but after a good run it runs in steady. Any recomendations on type of packing to use and has anybody installed...
  16. D

    Velvet drive trouble

    Hi again . '59 Owens 25&# Hi again . '59 Owens 25' with a 283 and velvet drive .Finally got it running good and took it out yesterday and ran great all day until ...Iwas doing 2300 rpms and it popped out of gear.I shut it down and checked the linkage and for any other problems i could see .The...
  17. D

    b59 Owens 283ci cooling problem solved

    " Hi i finally got my rebuilt " Hi i finally got my rebuilt 283 (with after market manifolds and risers)to cool down .I had the hoses routed the way the manual said . But that was wrong . I routed it from pump to block ,out of the intake at the top to riser. and a hose from the back of the...
  18. D

    Flushing a raw water system

    Are the water jackets in the Are the water jackets in the block sepparated from the left and right banks possibly causing overheating in one bank?
  19. D

    Overheating b59 Owens 283

    " Hi ,its Dennis again Well fi " Hi ,its Dennis again Well finally got her tuned up and new manifolds and risers and running real smooth.BUT it is overheating on the starboard side (head manifold and riser get real hot within 3 to 4 minutes.I swapped the manifold and risers around and it still...
  20. D

    Raw water cooling system

    " Hi i'm back with another " Hi i'm back with another problem with my 59 Owens ,283 I just put aftermarket manifolds and center risers on my engine and finally got it running today and noticed that the starboard side (manifold and head) were hot to the touch and the port side was cool . The...
Back
Top