Logo
FULL SITE MENU

Search results

  1. thudpucker

    Older 5.5 evinrud, changeTwo hose to Single hose

    I brought this up last year and got the Printed matter to do the work. Winter is coming on and I may find the time to get this project done.;) I'd like to have a conversation with somebody who's DONE this project. PM me with a phone contact or we can Email. '
  2. thudpucker

    To add an electric starter to 5.5 or 6 Hp evinrude or johnson

    I know I'm gonna catch a lot of flack over this post. :p I'm old. I like to row. But I have these two motors, and maybe I'm gonna put one on my 14' Jon boat.:D I doubt there was ever a Factory starter. I'd sure be grateful for any info I can use. I may use a Starter from a B&S lawn mower...
  3. thudpucker

    Searching for Rare or Old stuff. How many search engines do we have?

    I know of Ebay, Craigs list. Then there are Claz.org and SearchTempest, two that are supposed to search Craigs list. There must be other search engines. How do we post something that will go to ALL the search engines? ;)
  4. thudpucker

    Evinrude 5.5 Fuel/timing Question

    I have this little guy. It pulls through with good compression. The plugs are never Wet! There is fire to the plugs. The fuel line pump from the tank will drive the fuel all the way to the Carb. When we pull it through, the plugs don't get wet. It does not fire when I spray Carb Cleaner in to...
  5. thudpucker

    My little 5.5 Evinrude

    #5402B-E08844 This came to me in a trade. With all the usual Salve remarks about it used to run good etc. Nobody in the Business of fixing outboards would have taken this motor. I get so emotionally run down from starting all over again and again. This one needs a Shift lever. They have a long...
  6. thudpucker

    Evinrude 5.5 Question

    New to me: 5.5 Evinrude, #54028 (or B) E08844 Is the Evinrude and Johnson 5.5's the Same? I haven't tried to start it yet. Just pulled it through a few times. It seems to be OK so far. It's sitting in my Tank ready to go. Someone tell me all you know about this engine. Uh....don''t want to...
  7. thudpucker

    76-79 Ranger. Floor boards rotted. Big question here.

    I'd like to keep this old guy. It needs Floor boards and probably stringers and a new Transom. Do any of you know how I can remove the Cap? Instructions? Memory? Photos? Is there a better way possibly?:)
  8. thudpucker

    78 Johnson Starter died.

    Used starter, growled, turned slow. I took it apart and cleaned everything up. Then, back together, when I put the +12 to it, for a test, the sparks flew and smoke started out.:D Took it apart again, didn't SEE any Self inflicted wounds. Anybody have some Test process' to look for shorts, or...
  9. thudpucker

    76-73 Johnson 85 Hp Steering cable siezed in out board bracket.

    Boats been sitting for years. Shame on me!:( Now the shaft is stuck inside the Outboard bracket. I wonder if there's a way to take it all that stuff apart back there? I cannot pull the end of the Cable out of the Outboard bracket. It's OK up at the helm. I think the Cable is probably OK inside...
  10. thudpucker

    Where's the Numbers?

    I think this is a 1979 or 80 Johnson 85 Hp. Where are the numbers located on this engine? Hep me!
  11. thudpucker

    Question on Home-made Hyd Steering, or even shift and throttle control.

    This is for small boats. But the theory might work on anything. I read some posts on Stick Steering and coming up with the right cables. I thought this might work. Do you guys see anything wrong with my idea? Tell me, and I'll fix it if I'm able.:o
  12. thudpucker

    Question on SPitting & missing.

    On the older 2 Hose engines mostly. They suddenly start spitting, missing etc at an idle. I always thought the Spitting was beacuse one Cylinder did not fire, leaving the next cylinder to fire, and the wet gas ignited and caused a Spitting noise. That would be a Wet condition. Too much fuel. A...
  13. thudpucker

    1997 Mariner 25M

    0622096 1997 25M I had a thought of mounting a Tach. This is a thought, not a desperate Repair. Anybody have a schematic that would show me where to hook up the tach, the ground and maybe enough current left over to put a small LED for night work. I put a new Power Pack on in 2001. Cant...
  14. thudpucker

    Here's what I have, want to convert it to a single hose system.

    Evinrude outboard motor 5508-04045 That number dont come up good on Google.
  15. thudpucker

    Lost my Springy Stringy Thingy....need another!

    My Kill switch lanyard! For my 25 Hp Mariner. It was a nice coil of fabric/rubber in a retracting coil, about four feet long. The Sun killed it. You'd think that kind of Materiel would be at a Hobby Lobby or someplace that Sew's garments etc. Nope! Not in Cullman AL anyway. I wonder if there's...
  16. thudpucker

    25 Mariner, needle sticking at start of season.

    I've had this motor/boat since the year after it was purchased. About 97 or 98. The Previous owner let the carb sit in too much of the stuff that's supposed to keep your gas usable. Ever since then, the Needle sticks. Every time I'm done with the trip or whatever, I pull the fuel hose off as I...
  17. thudpucker

    85 Hp Johnson Hyd lift motor is Electrically "Open"

    On my 85 Hp Johnson the lift/drop Hyd. Pump motor is "Open". No continuity between any of the wires going to the pump. Any Photos or diagrams I can follow? Red #12 (power I think) Brown #12 (two of them, one for up other for down? Tan #10 (have no idea what that one does) I can't get the power...
  18. thudpucker

    Johnson trolling motor shaft siezed

    How do I safely get this motor apart to free up that shaft?:):confused:
  19. thudpucker

    Electric start conversion for 25 Hp mariner?

    I keep a lookout for electric start parts. I have a 25 Hp Mariner. Manual. I'm wondering if there is electric start stuff for it? Anybody have that info? I'm gettin a little too old n' fragile to be yanking on this thing.:mad:
  20. thudpucker

    Convertint older OMC's from Two hoses to singlehose. Need fuel pump info.

    I've got this old guy:p, a 5.5 Evinrude, working good a few years ago, sitting in my barn since, that I'd like to convert to a Single hose. I need a fuel pump for the job. Some fuel pumps are listed in the write up, from Chain Saws to Snow Machines. Who has a fuel pump off an unused or parts...
Back
Top