Logo
FULL SITE MENU

Search results

  1. R

    SX lower unit refill

    I have a 96 four wins with 4.3 engine and sx drive (1.66:1) I drained the outdrive after removing fill plg, oil level dipstick and drain plug ( outdrive in run position. I then filled the outdrive from the bottom using a pump and put 71 oz. into the unit. I checked the dipstick level and no...
  2. R

    1996 4.3L V/P exhaust bellow

    I have 4.3 v/p with SX drive. Looks like my exhaust bellows is getting old. What happens if I wait until it develops a hole before I replace it ? Do I have to remove outdrive? Manual says alignment tool needed to realign if I remove, don't have one, any suggestions? Thanks
  3. R

    Cooling issue 1996 4.3

    "I recently purchased a 1996 4 winns with a 4.3 ltr engine.The owners manual says it has a 4.3 GL, however I suspect that the motor was changed as there is a sticker on a valve cover indicating it is a 432A engine. My issue, the engine runs cool, so cool that the temp indicator does not...
  4. R

    Tune up kit

    "Hi, I have just purchased a t "Hi, I have just purchased a tune up kit volvo number 3810232. My engine is marked 432A, I now notice that it calls for 3810231 kit. What is the difference and will the one I purchased fit ? thanks"
  5. R

    Outdrive

    "Hi, can anyone tell me what y "Hi, can anyone tell me what year of out drive that I have on my boat? It has 3868156 stamped on the ident plate, also has a 1:66 ratio. Which cover do I remove to get at oil plug, the one with volvo penta SX cobra plate on it or the one on the top with the...
  6. R

    96 4 winns shift lever

    "Hi,I was having trouble shift "Hi,I was having trouble shifting. I removed the control lever and found outer core of the shift cable was not holding. There is a plastic "bracket" of sort that holds the cable (which has a couple of circular grooves on it). It is broken or worn so that it will...
  7. R

    Starter bolt on 43 ltr 432A

    "My starter will not engage,up "My starter will not engage,upon checking I find that a bolt holding the starter to the engine has sheared off. Any suggestions on how I can remove the old stud? Is this a common problem with this engine or what could have caused this? thanks in advance."
Back
Top