Logo
FULL SITE MENU

Recent content by mikey43

  1. M

    loosen outdrive oil

    ok here is the problem i found! before going to the lake checked my fluids everything was full! took boat out on the water got back just happened to raise the engine hatch just to look find the outdrive reservoir empty! what the hell! filled it back up doesnt hold much! notice a little oil...
  2. M

    new jasper motor

    mechanic put a rebuilt jasper motor in my boat. took it out today runs goood!! its a 97 20' baja outlaw 350 gm, no promblems just no water in lake!! just thought i would through in my two cents!:) '
  3. M

    shifting cable

    boat shop is puting a new 350 long block in my 97 baja new carb. they said want idle said it needs a new shifting cable!!! dont make sense to me but i dont know!!! what do yall think??? thanks for yalls input.:confused:
  4. M

    prop help!!

    my boat is a 20' baja closed bow 350 v-8 alpha 1 gen 2 mercruiser. my problem it has a 21 pitch stanless prop on it i also trim tabs that helped but still not right, when you stand on the throttle it runs up 2000 rpm then real slow two plane out. real boggy. i found a 18 pitch prop from iboat...
  5. M

    ldler pulley question

    i have 97 350v-8 gm alpha.. my question is on the ldler pulley a shouldered bushing that goes into it and that is what goes over the adjusting stud, well that bushing is real sloppy inside the idler, is it supposed to be like that?? i would think it would be tight. i don"t know thats why i ask...
  6. M

    water pump

    how long does a impeller take to put in a alpha 1 ser 2 outdrive???
  7. M

    fuel 1997 350

    ok have i have a question about fuel octane? have a 97 350 carb! what octane fuel should a person run in it? 87,89,92 or does it matter, i am in texas, any kind of additives? fuel is high here 3.79-4.00 gal, dont care might not make it to work, but i am going boatn in my baja. yep. thanks...
  8. M

    carbs 350 v-8

    goin to put new carb on my gm 350 v-8, it does have a performance cam in it, has been on there 3 + years edlebrock 750 cfm, i have to adjust on it all the time!! now i feel needs to replaced. i can smell gas sometimes, my question is should i put 750 back on it or 600?? what is the pros and...
  9. M

    gm v-8 digram for sepritine belt 1997 5.7L

    any body have a pic of 97 5.7 gm belt serptine diagram mine came off and cant get it back on thanks
  10. M

    risers and manifolds temp 1997 350

    i have a 97 350 gm carb, while i had the muffs hooked the other day, i noticed that one manifold was hot, u could leave your hand on it, but the other one was cool,while running the engine, the temp on the gauge was 150-160 normal thats about what it runs, is this a concern?? thanks for any input
  11. M

    carbs

    lets take a vote please if u have to get a another carb. what would be your choice?? on a 350 v-8. i have a 1409 edlebrock on now! problably needs rebuild or replaced. help
  12. M

    spark plugs

    what causes eletrodes to melt on the spark plug? where it comes out of the porcelin? its in a 350v-8 carbed. any ideas??
  13. M

    drive showers

    is a drive shower a good idea?? going to put one on my alpha 1 gen 2 outdrive saw where it would be helpfull on the outdrive!
  14. M

    speedodometer

    hey lookin for the parts for a alpha 1 gen 2 parts for the speedomter anybody have idea1?? bottom parts!!! small pvc!!:) thanks
  15. M

    mercury marine high five prop

    i have a mercury marine high five prop 23 pitch has anybody try one and how did you like it??? i'am going to put it on a baja 350 v-8 alpha outdrive 21'
See more
Back
Top