I am looking for the step by step process for removing the lower unit in my 1986 rude 40 hp. I am attempting to replace the water pump and housing. I have disconnected the 4 bolts from lower unit and the 2 from the trim tabs and lucky without tapping or beating it slid down about 1/2 and inch...
i have a 1972 25hp evinrude that i just rebuilt carb on. I have it set per the setting that joe reeves advised me so it is adjusted right. for some reason it is ruuning too rich. the mixture is right....50:1. i have it gapped at .033 so i dont know what else it could be. the only reason i say it...
you were helping me with the 1972 25 evinrude. thanks. yeah it was just the spark plugs that were caising it to misfire like that. also i took the carb off like you said and cleaned it again and reset the s/s adjustment and she purs. thanks a lot!
I have a 1972 25hp evinrude.....25202. I just recently rebuilt the carb and replaced new spark plugs and it ran GREAT. this motor is looks and runs good. well, i had to store my motor in the trunk of my car for about two weeks until we moved into our new place and get our garage set up. now the...
Joe, a friend told me about how you are a marine motor expert and i seriously need some help. Well, the motor is a 1972 25hp evinrude sportster with less than 20 original hours, long story but i insist it is very true. the motor started right up and looks great,everything really clean. i...
I just got this 1972 25hp evinrude and put it in the water the other day. It idles great but when in forward it has no power...at all it just squatts on itself. An older marine motor head seems to think it sounds like the high speed jet in the carb. also he seems to think my plugs are wrong...
I have just picked up a 25202 a 1972 25hp evinrude short shaft. It is in perfect original condition just like the day it was bought. It has less than 20 hours on it and looks and runs great! I know this HAS to be a traue gem. I have heard they were pretty good motors from my grandfather and his...
"i have this 1969 20 hp outboa
"i have this 1969 20 hp outboard and everybody is telling me that they will not work on it because the age is to old. and that they cannot find a carb rebuild kit or waterpump for it. it starts but just wanna have it tuned up so i can wet a hook. can anybody help...
how do i change out the fluid
how do i change out the fluid in my lower unit? and how do i verify its needs changing the gasket or seals? i pulled screw and a thick creamy fluid just kind of slowly came out....