Logo
FULL SITE MENU

Recent content by JustCasting

  1. J

    Looking for a little info.

    So I need to re-power my 246 World Cat and the Max HP is 300 HP so I have been looking the 150 HP motors in the 2020 line. I will be using it in the Salt mostly in Block Island/Montauk out to 60 Miles offshore along with Long Island Sound and the Hudson River. The boat loaded with Engines...
  2. J

    Is really a difference between the Mercury Sea Pro and Just Base Four Stroke 150 HP

    So I need to re-power my 246 World Cat and the Max HP is 300 HP so I have been looking at some of the different 150 HP motors in the 2020 line. I have not asked for a quote on the 3 Mercury models yet but I wanted to see if there is a big difference between these motors: 150 HP Pro XS 150 HP...
  3. J

    Honda BF 130 - Have been Debugging Issue for weeks and need some help

    I have a Twin BF 130 2000 Outboards. The Port Engine has been giving me issue for the past 3 weeks and I I have been working to resolve the issue for weeks. It starts fine and I get underway and once on plane a tone goes off and the engine stalls out as if it is fuel starved. I have tried...
  4. J

    Stumped - 2 New Lower units neither of them pumping water?

    Twin Honda BF130 year 2000. So I am felling a little stupid and stomped. i ran into some bad luck a couple of weeks ago when I hit an in marked submerged rock wall and damaged both lower units and props. Insurance covered 2 new lower units. I received them and installed them and then headed...
  5. J

    Question on Honda Parts - Lower Unit

    I damaged my lower unit and bent the prop shaft and cracked the Prop Carrier. I have talked to a handful of shops about rebuilding the unit and the cost is pretty high. My Honda is a BF130 LA 25" Shaft Serial Number BZBE-11000236 I found the Gear Case Assembly on the Parts catalog...
  6. J

    Hoping to save Memorial Day Weekend need help with Fuel Issue

    I have 2 Honda 130 BF 2000 motors with 600 hrs on them. Ended last season awesome with no engine issues at all. Winterized and the UnWinterized as normal and both engines started first try and ran on hose for 30 mins. I got to the water last week and both engines started and then while warming...
  7. J

    Need help reinstalling Bearing Carrier on BF130

    So I had a worn bearing carrier that would not take new seals due to its condition and major water intrusion. So I decided to rebuild both of my out drives this winter. I was able to use a puller the remove the carrier with the shaft in the outdrive, so I am trying to reinstall the unit back...
  8. J

    Teleflex Hydralic Steering Leak issue.

    Over the winter I replaced my Hydralic steering 100%. New Helm, hoses, and both cylinders. All Teleflex and Sea Star parts. It is a world cat boat with a liquid tie bar Valve in between the cylinders. i am having fluid leak out of the fill plug on hot days and can not figure out how to stop...
  9. J

    BF 130 Prop Shaft Seal-which direction?

    Question. 2000 BF 130 HP Prop Shaft Seal-which direction do seals face? Does flat surface face in towards prop on both seals? or do they oppose each other? Also how much pressure is needed when pressing them in? Troy
  10. J

    BF130 2000 - Engine Runs smooth but Tach is not correct.

    BF130 2000 - Engine Runs smooth but Tach is not correct. Tach shows like 4000 at Idel and 7000 RPM at Half and is pegged at WOT. engine sounds smooth and normal. any thoughts, things to test? Troy
  11. J

    What is this Cooling part on a 2000 BF130A

    2000 Honda BF 130A. On the back of my Fuel Pump I was surprised to find water cooling hoses attached. A hose comes from engine to black box on fuel pump and then to a tee that goes to pea stream port and back of engine. the plastic nub the hose hooks to broke off. Here is a Link to a Photo...
  12. J

    BF130 and Sea Start Cylinder HC5347

    So after 15 Years the Sea Star Cylinders on my engines needed to be replaced as the cylinder walls had pitted on the inside. Sea Star told me the only cylinder that would fit my 246 World Cat Front Install was the HC 5347 so I got 2 new cylinders of course they d not fit :) My Engine has an...
  13. J

    Twin 2000 Honda 130 F-Stroke - What Props do you recomend.

    I recently purchased a 2000 World Cat 246 with Twin Honda 130 HP. It has the standard Honda Stock 3 Blade Prop. At Full Throttle the engine only hits about 4K RPMs. For the 2000 Honda 130 HP Four Stroke what is the Max RPM? have any of you guys that have 130 HP tried other Props to get...
  14. J

    Need help trouble shooting Starter

    I just picked up a new to me Worldcat 246. It has twin Honda 130 hp 4 strokes with 350 hrs. yesterday was the first launch and I ran into issue. Both engines started first turn of key. i let them warm up and the port motor died with no alarms or warning. It then would not turn over. I had...
See more
Back
Top