Logo
FULL SITE MENU
G

GENEREED

Member
Joined
Last seen
Messages
34
Reaction score
0

Latest activity Postings About

    • G
      GENEREED replied to the thread Plugs and gas.
      Thanks. I received a evinrude factory service manual today in mail. In very good shape! The binding was like new. Just on the 79 v6...
    • G
      GENEREED replied to the thread Plugs and gas.
      I Need confirmation on: 79 v6 150hp-two model numbers. 150940 and 159949. Is the only diffence in the lower unit length. With the 940...
    • G
      GENEREED replied to the thread Plugs and gas.
      It’s a chance we take. I bypass even inquiry into a OM that has most of paint worn off LU. I am 2 for 2 in success. Hoping same for...
    • G
      GENEREED replied to the thread Plugs and gas.
      Okay!
    • G
      GENEREED replied to the thread Plugs and gas.
      2 stroke. 79 150hp evinrude
    • G
      GENEREED replied to the thread Model number.
      To your last question yes. But I am waiting, for our new found winter is stopping me. The boat is under cover. We got over a foot of...
    • G
      GENEREED replied to the thread Model number.
      Yes to all
    • G
      GENEREED replied to the thread Model number.
      Motor runs very good but is hard starting. Seemed to turn over good but maybe not good enough for V6. Only have v4 to compare. But same...
    • G
      GENEREED replied to the thread Model number.
      Thank you. That is a confirmation, two agreed so I can check to see if there is excess carbon to deal with. Thanks!
    • G
      GENEREED replied to the thread Model number.
      So you are saying that it is just a logo and doesn’t indicate any work done on the piston and rings?
    • G
      GENEREED posted the thread Plugs and gas in Johnson Evinrude Outboard Forum.
      1979 150 hp evinrude again. Best plug to use and best gas to use. Thank you, GeneReed
    • G
      GENEREED replied to the thread Model number.
      What spark plugs would you recommend? I use motor for point a to point b only. I also only use champion. Same with gas- I use 89 gas?
    • G
      GENEREED replied to the thread Model number.
      I will check for myself. After I installed a new gas filter, it had been unchanged for quite some time, it ran very good. I was...
    • G
      GENEREED replied to the thread Model number.
      I was told the stamp was put there to show faulty pressure-back piston rings were changed per service bulletin.
    • G
      GENEREED replied to the thread Model number.
      • IMG_0046.jpeg
    Show older items
  • Loading…
  • Loading…
Back
Top