I have attached the schematic and parts to install a remote oil change kit for a 5.7L VolvoPenta/OMC Cobra motor. Would anyone know if install instructions are available or published? I see that the remote adapter bolts to the exhaust riser. Should longer bolts be used as the adapter adds about ½” thickness to the height. Also, would someone know where does the hose bracket (part6) attach to the engine. The adapter retainer (part 4) shows one “O” ring (part3) on the top of the retainer. The retainer has a groove close to the hex portion that looks like an o ring fits in the groove to seal the adapter retainer- does the o ring fit here or at the top. Also should there be any sealer placed on the adapter retainer or other areas.
I’ve seen some comments that the hoses can leak over time. I did find new old stock original Volvo hoses but am wondering if I should just get braided aircraft hydraulic hoses made up and use those. The engine is installed in a deep area and the hose replacement would be pretty awkward to redo. Amy advice/help would be most appreciated.
thank you all
rmk