Derek Wells
New member
Just put a 1999 ocean pro 130hp on my whaler. It has sat for 10 years but has under 20 hours on it.
The tilt motor runs but will not lift the engine up. You can move it by hand regardless of whether the release is tight or not.
I tried replacing the release valve screw. It did not help so i put the old one back in.
People are telling me its the relay but if it was, wouldnt the motor not run?
The tilt motor runs but will not lift the engine up. You can move it by hand regardless of whether the release is tight or not.
I tried replacing the release valve screw. It did not help so i put the old one back in.
People are telling me its the relay but if it was, wouldnt the motor not run?