Uflex USA Catalog

TIE BARS FORTWINOUTBOARD ENGINES 84 TIE BARS FOR APPLICATIONS WITH FOUR CYLINDERS AND FOUR ENGINES A pre-packed kit is available which includes: • 4x pre-connected and purged cylinders • 4x tie bars ATTENTION: For more details, please contact our Technical Assistance • Suitable for applications with triple outboard engines and dual cylinders UC128-OBF • 4 different lengths available: A93 x 26 - 42613 Y - 26” (660,4 mm) twin engine centers A93 x 27 - 42637 N - 27” (685,8 mm) twin engine centers A93 x 28 - 42638 R - 28” (711,2 mm) twin engine centers A93 x 30 - 42639 T - 30” (762,0 mm) twin engine centers Heavy duty triple engine/twin cylinder tie bar kit for use with UC128 and UC128P “Port” version outboard cylinders.  Suitable for use with Protech and UC128-SVS (previous model) cylinders these AISI 304 electropolished and passivated stainless steel tie bars are simple to install and allow for independent trimming of engines with minimal effect on engine alignment. ATTENTION: As the tiller arm position varies from engine to engine and the distance between two engines is not predictable, unexpected interferences may occur while tilting. Checking the cowling clearances with the tie bar at various engine tilt positions and turning angles is required. Should you need additional information, please do not hesitate to refer to our Technical Service. A93 A93 X LL X ENGINE MODEL LL = ENGINE CENTER DISTANCE A93 TIE BAR FOR TRIPLE OUTBOARD ENGINE/TWIN UC128-OBF CYLINDERS A93 - application example