SeaStar Solutions Catalog

64 ® APPLICATION GUIDE: NOTES: 1. Balanced system – ie: the number of turns lock-to-lock is equal port to starboard or vice-versa. 2. Unbalanced system – ie: the number of turns lock-to-lock is not equal port to starboard or vice-versa. 3. Requires cylinder rod end adapter HA5424 supplied by SeaStar Solutions. 4. HC5332-3 replaces HC5326-3 as of January 2000. If installing HC5326, additional clevis supplied by engine manufacturer required. Mastry Engine part #SUN144 *not provided by SeaStar Solutions. 5. The installation of the HC5332-3 sterndrive cylinder requires the use of SeaStar Outboard hose only. DO NOT use 3/8" copper or nylon tube. 6. If engine outdrive is NOT equipped with a torquetab on the underside of the lower leg one must be installed to reduce prop torque. 7. Yanmar Engines using the Bravo III drives require the use of cylinder HC5326-3.8. Installs like cable. ENGINE (NUMBER OF WHEEL TURNS) MAKER/ STEERING ENGINE/DRIVE (CYLINDER USED) SEASTAR SEASTAR BRAND CONFIG. MODEL YEAR MODEL PART # (1.7 cu.in .) (2.4 cu.in .) NOTES BMW NON POWER ALL TO DATE BA125-8EMV HC5330-3 4.9 N/A 1 POWER ASSIST ALL TO DATE 125-8EM HC5328-3 4.9/5.8 3.4/4.1 2 MERCRUISER NON POWER MERCRUISER 1 1983 & 2000 BA125-8EMV HC5330-3 4.9 N/A 1,6 NON POWER ALPHA I 2001 TO DATE BA135-7EM HC5332-3 5.0 3.5 1,4,5,6 NON POWER BRAVO I, II, III 2001 TO DATE BA135-7EM HC5332-3 5.0 3.5 1,4,5,6 POWER ASSIST MERCRUISER 1 1983 TO DATE 125-8EM HC5328-3 4.9/5.8 3.4/4.1 2 POWER ASSIST ALPHA I 1984 TO DATE 125-8EM HC5328-3 4.9/5.8 3.4/4.1 2 POWER ASSIST BRAVO I, II 1984 TO DATE 125-8EM HC5328-3 4.9/5.8 3.4/4.1 2 POWER ASSIST BRAVO III 1984 TO DATE 125-8EM HC5328-3 4.9/5.8 3.4/4.1 2,7 OMC NON POWER 400/800 SERIES 1985 & PRIOR N/A N/A N/A N/A NON POWER COBRA 1986 TO DATE BA150-7EM HC5326-3 6.0 N/A 1,3 NON POWER KING COBRA 1986 TO DATE BA150-7EM HC5326-3 6.0 N/A 1,3 POWER ASSIST 400/800 SERIES 1985 & PRIOR N/A N/A N/A N/A POWER ASSIST COBRA 1986 TO DATE 125-8EM HC5328-3 4.9/5.8 3.4/4.1 2 POWER ASSIST KING COBRA 1986 TO DATE 125-8EM HC5328-3 4.9/5.8 3.4/4.1 2 VOLVO NON POWER 270 TO DATE BA125-8EMV HC5330-3 4.9 N/A 1,6 NON POWER 275 TO DATE BA150-7ATM HC5314-3 6.0 N/A 1,6 NON POWER 280 TO DATE BA135-7EM HC5330-3 5.0 3.5 1,4,5,6 NON POWER 290 TO DATE BA135-7EM HC5332-3 5.0 3.5 1,4,5,6 NON POWER DIESEL TO DATE BA135-7EM HC5332-3 5.0 3.5 1,4,5,6 POWER ASSIST 275 TO DATE N/A N/A N/A N/A POWER ASSIST 280, 290 TO DATE 125-8EM HC5328-3 4.8/5.8 3.4/4.1 2 POWER ASSIST DIESEL TO DATE 125-8VEM HC5329-3 4.9/5.8 3.4/4.1 2 POWER ASSIST 32, DIESEL 1997 TO DATE 125-6VPS HC5331-3 4.8/5.5 3.4/4.1 2 POWER ASSIST 41-42, DIESEL 1992 TO DATE 125-6VPS HC5331-3 4.8/5.8 3.4/4.1 2 POWER ASSIST DPS & SX 1996 TO DATE 125-6VPS HC5331-3 4.8/5.5 3.4/4.1 2 ORDERING GUIDE: ENGINE/CYLINDER COMPONENT QTY. CONFIGURATION DESCRIPTION REQ’D MODEL PART NO. SINGLE & DUAL STERNDRIVES CYLINDER 1 SEE APPLICATION GUIDE (Number of Turns varies by Helm HELM 1 SEASTAR 1.7 (SEE NOTE 1) HH5271-3 & Cylinder. See Application Guide.) HELM (OPTIONAL) SEASTAR 2.4 (SEE NOTE 2) HH5272-3 For dual sterndrive applications use OIL 3 SEASTAR OIL (QT.) HA5430 engine manufacturers supplied tie bar. EXTRA TUBE/HOSE SEE NOTE 3 ADD EXTRA STEERING STATION: HELM 1 SEASTAR 1.7 (SEE NOTE 1) HH5271-3 SEASTAR 2.4 (SEE NOTE 2) HH5272-3 FITTING KIT 1 FOR USE WITH 3/8 NYLON/COPPER TUBE HF6010 FOR USE WITH SEASTAR HOSE HF6007 OIL 1 SEASTAR OIL EXTRA TUBE/HOSE (SEE NOTE 3) OPTIONAL EQUIPMENT BACK PLATE KIT (FRONT STANDARD HELMS) HA5418 20 DEGREE WEDGE (FRONT STANDARD HELMS) HA5419 AUTOPILOT FITTING KIT (FOR ALL HELMS) NYLON/COPPER TUBE HF6010 FOR USE WITH SEASTAR HOSE HF6007 Tilt Helm-SeaStar 1.7 Rear Mount Helm-SeaStar 1.7 HH5261-3 Tilt Helm-SeaStar 2.4 HH6542-3 Rear Mount Helm-SeaStar 1.7 HH5262-3 POWER ASSIST STEERING PA1200-2 NOTE: These recommendations apply to factory stock sterndrives only. Modified instalations may require a higher capacity steering system. If in doubt, contact our technical service for assistance. 1. SeaStar 1.7 helms are the standard recommendation for both non-power and power steered applications. 2. SeaStar 2.4 helms can be specified for power steered applications where faster steering response is desired. Review the Application Guide on the previous page for recommendations. 3. For SeaStar 1.7 systems, use 3/8” diameter nylon tubing (Part No. HT5xxx). For SeaStar 2.4 systems or any system using the HC5332 cylinder, use the following option: (A) Outboard Hose: hoses must be ordered in standard lengths. They cannot be cut to length. OR (B) Copper tube: 3/8” diameter copper tube and hose kit (Part No. HF5508). HYDRAULIC STEERING - Sterndrive