SeaStar Solutions Catalog

63 ® COMPLETE SYSTEM System components sold separately. See applications and ordering guides to select appropriate components. COMPONENTS SeaStar 1.7 - Front Mount Helm HH5271-3 Sterndrive Cylinder HC53xx-3 cylinder part numbers vary, see application chart on page 64 Hose Kit (2 hoses) HO51xx SeaStar Oil (2 Quarts) HA5430 OPTIONS SeaStar 1.7 - Front Mt. Commercial Helm HH5217-3 SeaStar 1.7 - Rear Mount Helm HH5261-3 SeaStar 1.7 - Sport Tilt Helm HH6191-3 SeaStar 1.7 - Classic Tilt Helm HH6541-3 SeaStar 2.0 - Front Mount Helm HH5273-3 SeaStar 2.4 - Front Mount Helm HH5272-3 SeaStar 2.4 - Front Mt. Commercial Helm HH5224-3 SeaStar 2.4 - Rear Mount Helm HH5262-3 SeaStar 2.4 - Sport Tilt Helm HH6192-3 SeaStar 2.4 - Classic Tilt Helm HH6542-3 SeaStar Round Bezel Kit HA5478 SeaStar Backplate Kit HA5418 SeaStar 20° Dash Wedge Kit HA5419 SeaStar Bulkhead Hose Kit (2 hoses) HO81_ _ Add-A-Station Kit (Nylon/Copper Tube) HF6010 Add-A-Station Kit (Hose) HF6007 3/8” Tubing (see ordering guide) HT5xxx SERVICE ITEMS SeaStar Oil (1 Qt.) HA5438 Steering Wheel Locknut HP6032 SEASTAR STERNDRIVE STEERING SYSTEM: SeaStar Sterndrive Steering is the best choice for non- power assisted sterndrives. The system is based upon the SeaStar helm family, which allows for dual station and autopilot use. Cylinders are specific to drive brands and models. APPLICATIONS: Ideal for most sterndrives, especially non-power- assisted units, SeaStar is suitable for single and multiple drives and dual stations. FEATURES: Best and Most Economical autopilot interface for sterndrives! Easy installation. Simple multiple steering station connection. Optional SeaStar 2.0 & 2.4 helms for quicker steering response. Standard 3/4” tapered steering shaft. Fast, easy installation. Meets A.B.Y.C. standards. Meets N.M.M.A. certification requirements. SEASTAR AUTOPILOT INTERFACE SeaStar is the best steering choice to interface with most autopilots. If you are installing an autopilot on a mechanically steered boat, we recommend you upgrade to SeaStar for performance reasons. If you’re upgrading to SeaStar, plan ahead: future installation of an autopilot or extra steering station can be simplified by installing two pairs of shorter hose kits. Connect them with union coupling fittings, part no. HF5530. Tee fittings can be installed with ease at a later date. Bulkhead union fitting kits are available to facilitate hose runs through transoms and splashwells: HF5512 up to 3/4" (19mm) splashwell, 1 cylinder HF5513 up to 3" (76mm) transom, 1 cylinder HF5514 up to 3/4" (19mm) splashwell, 2 cylinders HF5515 up to 3" (76mm) transom, 2 cylinders For an autopilot installation, a third (compensating) line must be installed and identified. (SeaStar helm Ports marked “R” are for connection of additional helm and/or autopilot compensating lines.) Use HF6007 (outboards) or HF5502 (sterndrives and inboards) fitting kits when adding an autopilot to your SeaStar system. See Page 144 HYDRAULIC STEERING - Sterndrive