Logo
FULL SITE MENU

Which can i use

T

txny13

Regular Contributor
"i guess i cant find pistons f

"i guess i cant find pistons for my aq170 so which motor will work i have a 19 ft tri hull chysler just redone transun and floor i have a 280 out drive ,now all help is wellcome"
 
"Why do you say that you canno

"Why do you say that you cannot find pistons for your engine? Start going to page 6 of this link:

http://spirit.the-millers.org/volvoparts.pdf

There, if the size of your pistons' wrist pin is 22 mm (most common), you will find that the numbers for the piston sets are: 272002 for standard; 27012 for 15" oversize; and 272004 for 30" oversize. Then go to Google and type the words "Volvo" and the correct number for your piston set, and you will see how many sites you get. For example:

http://www.thevolvosite.com/1800/volvo-1800-engine-internal-parts.html

http://www.autopartswarehouse.com/search/?N=9681+1733+4294966748+6218

http://importecparts.com/volvolist.html

You can also try to take the number to an autoparts store and ask them to cross-reference it so that you can get through them an aftermarket piston set for your engine.

Will this do, or are you still considering re-engining?"
 
"I saw one of those engines on

"I saw one of those engines on Craigslist in Seattle, boat section for $100. Check it out.

Have a great day,

Rob."
 
Back
Top