Where do I plug in the DR H?

[beeze455]

Sorry for the dumb question, but I could not find the spot to plug in the DR H wire for my BF130. I found some plugs on the control harness that would fit and another back on the engine, but they did not work. I figured the motor would have a plug dangling like my Evinrude.

 

[hondadude]

The 130 is not compatible with Dr. H. The ECU is pretty simple and only has the winky blinky of the "check engine" light to indicate codes.

Mike

 

[beeze455]

Dammit. His site says BF130.

 

[m smith]

If you cannot return it, I was looking to buy one anyway. Just need to make sure it works on my 06 BF200.

 

[beeze455]

M smith - I most likely will do that if your in the usa. Cheaper than shipping it back to him. I am annoyed it says bf130 supported and find out it is not.

Anytool I can use to see the data my ecu has stored?

 

[m smith]

I am in Tampa, FL. Send me a link to what you purchased so I can double check what it is.

I am sure reading it is simple, either it is coded in the number of flashes the led is doing, or pattern of beeps.

 

[beeze455]

http://www.ebay.com/itm/Honda-Dr-H-...ash=item21294656c5:g:vpIAAOSwcaFZG8wh&vxp=mtr

I was thinking I would get it quicker because the ebay listing said california...but it came from austrailia and took a decent amount of time.

 

[m smith]

10 4. Let me do some research. Downloading the user manual now. Once I confirm I can use the tool, I will PM my email and cell number. Just want to be sure before pulling the trigger.

 

[m smith]

What year is your motor?

 

[beeze455]

What year is your motor?

My motor is a 2001.

I don't mind sending it to you and having you try it. If you dont like it, I will have you ship it to Australia. I have message him about it not being compatible. I wanted it for eas of mind and to see hoe many hours the motor had,

 

[m smith]

Beeze455 - sent you a pm with my contact info.