Logo
FULL SITE MENU

Water tube problem

P

piperdog

Member
"hello, on changing impeller o

"hello, on changing impeller on a 1980,25hp blueband the water tube came out with the lower end ,but when i try to put it back in place into the powerhead there is nothing to stop it going up too far and it is a very loose fit ,do i have to start stripping or do you recon im not aligning it correctly into the powerhead .thanks piperdog"
 
"Put a mirror under the trunk

"Put a mirror under the trunk and have a look when you are putting it in .Or try putting it in the housing and installing, its a bit harder to to but not impossible ."
 
"There a chance you melted the

"There a chance you melted the seal and plastic fitting under the powerhead if you overheated it. It can be changed from the underside, not easy."
 
Back
Top