Logo
FULL SITE MENU

Want to replace VRO with nonVRO options

Z

zonkers

New member
"Hi,
Newby here, I have a 19

"Hi,
Newby here, I have a 1990 Johnson 120hp looper that has a failing fuel pump. I bought it with the VRO system already disconnected and have been mixing fuel. I want to keep it that way and have been poking around here for info and have seem to found two options. One is # 438402, which seems to be replacement that will mount right to the old bracket, just without the VRO end. Does anyone know if it comes with a new pulse limiter? The other option I hear about is only @ $60 and seems to have the pulse limiter removed, so I'm guessing it's electric. Will this work and mount with my motor? Does anyone know which would be a better option for my motor?

Thanks!"
 
Any older fuel pump from say a

Any older fuel pump from say a pre 83 V-4 will work and can be adapted.The earlier V-4 135hp ( 75 and 76 ) will also work and you just need to remove the limiter and intall a fitting for pressure /vacuum to the pump.The earlier 135hp unit is likely the cheapest and simplest.There are repair kits available for the VRO.
 
"I have the same question.. Ca

"I have the same question.. Can I replace the VRO pump in picture below with old school pump?? for my 225txcub??

Larry

VRO pump..
87961.jpg


Old School Pump Replace VRO with??
87962.jpg
old school pump
 
Back
Top