Volvo Penta Duo Prop tool

[Tuttimon]

Does anyone know the dimensions of the Volvo Penta Duo Prop Tool Volvo Tool - P/N 3855876 (this is specific to the front prop)

Not to be a cheapo but it seems simple enough to make. OEM is $150 round pipe with 3 cuts in it.
Diameter of inner pipe would be perfect.
Thanks

 

[RicardoMarine]

The factory tool takes up space on board and it serves no other purpose.
If you are gentle with it, a channel lock pliers works great, and can be used for other purposes.

Put that $150 back in your pocket where it belongs.

 

[Windy Bay]

I just made one out of schedule 80 PVC. Just cut 3 slots 120 degrees apart, then put a pipe wrench on the pipe and removed the nut. You can also hold the piece of pvc up to the prop and mark where the slots need to be, I used a mikita grinder to cut the slots in the pipe