aaabellihotmailcom
New member
"My MD6A has difficult time to
"My MD6A has difficult time to start when is cold (even if is air temp in the 70-80s). I have to use my starter for long time and once it's started, although take time to reach normal RPM, everything is fine, still able to push my 3.5 tons boat at 5-6 knots.
When it's hot everything is fine, and if I turning it off, it reasonably re-start again.
I cleaned the tank, replaced all filters. Tank was very bad, but now is perfect.
Diesel flow is good to injectors.
The engine starting process improved, but not drastically. Still using too mutch my starter.
I cannot continue like this, I'm afraid my starter will soon die..
I noted that during the starting process white smoke came out from exaust pipe. Once started everything is normal.
Any suggestion?
Thanks
Antonio"
"My MD6A has difficult time to start when is cold (even if is air temp in the 70-80s). I have to use my starter for long time and once it's started, although take time to reach normal RPM, everything is fine, still able to push my 3.5 tons boat at 5-6 knots.
When it's hot everything is fine, and if I turning it off, it reasonably re-start again.
I cleaned the tank, replaced all filters. Tank was very bad, but now is perfect.
Diesel flow is good to injectors.
The engine starting process improved, but not drastically. Still using too mutch my starter.
I cannot continue like this, I'm afraid my starter will soon die..
I noted that during the starting process white smoke came out from exaust pipe. Once started everything is normal.
Any suggestion?
Thanks
Antonio"