Logo

trouble starting

briang

New member
I have a 15hp 1989 evinrude will only start with starting fluid after starting runs great sprayed gas in intake starts up cant figure it out can anyone help
 
Check compression with guage; check spark with open air tester will it jump a 7/16" gap with a blue spark. Carb probably needs a good cleaning and a repair kit installed. Don't use starting fluid because there is no oil in it and will damage engine only use gas mixed 50:1. Good luck
 
Did you say you rebuilt the carb or did a rebuild compression test? It sounds like either your choke is not working or the main jet is restricted (needs to be cleaned)
 
Back
Top