MarineEngine.com does not offer troubleshooting assistance or repair advice by email or by telephone.
You are invited to join our public Boat Repair Forum to seek assistance from other members.
You may also visit the Boat Motor Manuals section of our site to obtain a service manual.
I have a question about this pump. When I bring the motor to the full upright position it will get stuck there and will not go down. I can raise and lower it all day long till you go full up. It happened again at the lake today. If I turn the control knob will that let the pressure off where I can manually lower it? Better yet do you have a fix for it getting stuck in the full up positionHook up the power to the motor and press the buttons to see if it runs, the hoses are available online - you need 4 two small ones and 2 large; there's a knob on the front for the reverse lock.
If the motor is OK oil should be pumped out of the lines; replace them and bleed.
View attachment 32346
View attachment 32347