Logo

Trailering Lock

joecrow

Member
"I have 86 Force 125 and when

"I have 86 Force 125 and when trailering back and forth to the water, I naturally keep the motor raised
Not wanting to put any added strain on the tilt hydraulics, I tie the motor up
Does anyone know if there is some kind of "trailering lock" available for these motors?
Something more reliable than a 2x4 and a bungee cord?
Thanks,
Joe
My other boat is a Zamboni"
 
"I have an 88 Force 125, It ha

"I have an 88 Force 125, It has a trailering bar, that sits between the engine and boat. It should be located between the engine and the tilt rams. if you have two brackets about 12" apart with holes with nothing in the holes yours may have been lost. I would send you a photo, but my boats in the shop (again)"
 
"Just do a Google search for t

"Just do a Google search for the product number below. NOt cheap for what it actually is, they do show up on ebay occasionally though, search for force trailering bar on ebay.


BRACKET KIT-LOCK
Product #: <u>819504A2</u>

Price: $104.53
Ships in 3 - 5 days
Superceding Parts: F5H179 BRACKET KIT-LOCK
819504A1 BRACKET KIT-LOCK
819504A2 BRACKET KIT-LOCK

Always use genuine Mercury/Mercruiser parts."
 
"Thanks Brian,
I'll check


"Thanks Brian,
I'll check e-Bay before shelling out $100,
or even $84 at boats.net
But the info is very useful
Thanks again,
Joe"
 
"I need the gasket that fits a

"I need the gasket that fits about 1/3 way down the driveshaft housing on a 90 HP Force. Does anyone know where I can source this and/or a part number? Thanks, Bill"
 
Back
Top