Torque Setting for Fly Wheel Bolts - 1998 Honda BF40

[eneusiis]

Morning,

Going to be doing my belt on my BF40 this weekend, its a 1998 Honda BF40 LHTRA, the flywheel has 4 14mm bolts versus just the single that many motors have. I assume there is a specified torque setting, but don't have access to a manual for this motor. Anyone know by chance and willing to share?

Thanks in advance!

Eric

 

[hondadude]

48 ft lbs or 65 Nm.

Apply oil to mating surfaces and bolt threads. Then tighten to the above specs.

Mike

 

[eneusiis]

Thanks Mike, pretty soon, I am going to owe you an invoice or a case of beer in the mail!

 

[eneusiis]

48 ft lbs or 65 Nm.

Apply oil to mating surfaces and bolt threads. Then tighten to the above specs.

Mike

Is there also a torque setting for the belt pulley? I replaced that as well, while I was in there.

 

[hondadude]

32.5 ft lb