torque for bolts in pds housing to bell housing

[tmcboat]

Hi All,
does anyone know the torque lbs for the 6 bolts that attach the PDS housing to the Ford Bell housing on a 270 model-- tried the Volvo workshop manual and service manual and it did not mention anything about the PDS housing bolts . There is a general reference to bolt size ex. m 10= 36.9 lbs of torque and bolt size m 12= 59 lbs of Torque but not sure it applies to the PDS housing since it was not mentioned in the manual.


thanks,
tmcboat

 

[kimcrwbr1]

You can use any generic torque chart for the bolt shank size and thread and grade?
http://www.machinetoolhelp.com/Repairing/bolt-torque-chart.html

 

[RicardoMarine]

...............................

Hi All,
does anyone know the torque lbs for the 6 bolts that attach the PDS housing to the Ford Bell housing on a 270 model--
You have a Borg Warner flywheel cover (the part that fastens to the Ford engine) that mates to a ..... are you ready for this.......... a Borg Warner -slash- Volvo Penta PDS adapter housing.

Those 6 bolts are the Borg Warner bolt pattern.

I will agree with Kim re; torque value........... and DO NOT over torque!