timing pointer help

[eddie_russell]

does anyone have a pic they can post of a timing pointer for an 86 mod 350 454 rh crusader? Mine is to rusty to see where the 0 is. I realize I can pull tdc and get it, just hoping for an easy way out. Thanks Ed.

 

[firepiper]

How about on the flywheel?

 

[eddie_russell]

nothing on the flywheel, thanks for the reply

 

[WoodieMan]

If you have the one with what I can only describe as hills and valleys for the degree increments, the deepest widest valley is "0"

 

[knuckle47]

Would you call that a sawtoothed pattern?

 

[eddie_russell]

it is the sawtooth one but it does not have a deeper one to show tdc. I know it is in 2 degree increments and I think 0 is 2 knotches from the end, if someone remembers if it is 2 from the top or from the bottom on the rh engine would be a big help. thanks for the replys. Ed

 

[jubilee]

Eddie,
This should be what you need.

 

[diver_dave]

wow, i've only seen pictures of these over 10 year old engines without rust. Very nice!

 

[eddie_russell]

thanks jubilee, thats just what I needed