dripclouds
New member
took the boat out last week and it was barely running. thought that i may have been a timing issue. took the distributor off, cleaned up the points and put the distributor back on. my mistake was to not mark the pulley at the top, so now i am out of time. there is NO ARROW or mark on the pulley ( may be aftermarket ) found TDC (of the #1 cylinder) on the flywheel and aligned it with the center line of the distributor....NOW what i need to know is where the key way on the pulley falls in relation to TDC...if anyone could tell me where that is or even better send a picture of a top view with the flywheel at TDC..thanks in advance...happy to answer any questions!!