TACHO

[armo_1]

Hi can anyone tell me where th

Hi can anyone tell me where the tacho take off is from the engine (VP 5.0gl). Mine is sticking at 1000rpm all the time.
Regards Ian

 

[scott_s]

"grey wire at coil neg. term.

"grey wire at coil neg. term. not likely the problem though. if tach has power to it, it should zero out when ignition switch is on if there is no input."

 

[ejbtech1]

"Run a wire to your old guage

"Run a wire to your old guage from the negative coil wire. If it's still at 1000, it's not the wire, but the guage.
Good luck...................

"

 

[armo_1]

Thanks for the info.

Thanks for the info.