Logo
FULL SITE MENU

Switch box values( volt / ohm)

E

exracer

New member
Where can I see the volt / ohm values ( specs) for a 1983 mercury 4 cylinder, 2 stroke? I'd need the trigger,and stator values ,as well. Thanks, Greg
 
Mercury service manual would be the best place to get the data you are seeking. Available from most any Mercury Marine dealer.
 
I had my 115 hp Mercury motor oil changed and serviced. I have not had any issues with it. I decided that I should check the oil. I raised the motor with the trim took the cover off lowered it into the water checked the oil. All was good. Then replaced the cover. When I got it out on the lake the beeper went off and I found the dipstick not completely down. I pushed it all the way in saw no sign of oil in the motor leaking or blowing out. I started it up again drove it a little way and it started beeping again. What is wrong with it
 
Back
Top