Hi everyone,
Quick question about an '86 DT200 I picked up.
I was cleaning it up and checking it out before I put it on my boat, but when I did a compression check, it came back at 60psi on every cylinder.
This seems very low for all cylinders to be same? I haven't checked the reed assembly yet.
Cheers,
Matthew
Quick question about an '86 DT200 I picked up.
I was cleaning it up and checking it out before I put it on my boat, but when I did a compression check, it came back at 60psi on every cylinder.
This seems very low for all cylinders to be same? I haven't checked the reed assembly yet.
Cheers,
Matthew