Logo
FULL SITE MENU

Suzuki DF 300

M

Mike ONeal

Guest
Does anyone know what the faul

Does anyone know what the fault code 5-2 means for a DF 300 Suzuki ??
 
"I'm pretty sure it's

"I'm pretty sure it's a low voltage code. Did it come up after starting? Mine did the same thing during my first ride out. It turned over slow when starting and the alarm went off giving a 5-2 code. Make sure your battery cables are clean and tight. If you have wingnuts, replace with regular locking nuts so you can tighten them better."
 
"Thanks, I got a manual and lo

"Thanks, I got a manual and low voltage is one of the problems related to this code. Did you have to get a service tech to clear out the ck. eng. code with a lap top ? I don't know how to clear it out. Or, does it go away when the voltage is corrected ? Thanks again for your help."
 
"Mine just went away. Turn you

"Mine just went away. Turn your battery switch off and let sit for a few minutes and switch back on. It should go away. If that don't work, disconnect the battery cable. You can also scroll to the engine diagnostic page on the guage to see if there is anything is there. Just-in-Time would know more on this subject about clearing the code. I also put my switch to both batteries when it happened."
 
5-2 is VVT advancd (port&#

5-2 is VVT advancd (port) which means there is a large difference between the target advance angle and actual advance angle.
 
Back
Top