Starter problem

[llhudgens]

I have a Crusader 350 with sta

I have a Crusader 350 with starter problem. I am trying to remove the starter with no luck. I removed the the 2 nuts from the bolts and that appears to be the only thing holding it on but it will not budge.Taped it lightly with a block of wood and hammer but still no luck. Perhaps I am missing something. I am no wiz at this stuff so please forgive my lack of knowledge.

 

[Eddie from Oregon]

Spray WD-40 all around area wh

Spray WD-40 all around area where starter contacts the engine block. Let sit over night and try again.

 

[toolguy1025]

these are a very tight fit. ab

these are a very tight fit. above suggestion would be your best action.