farmerrick
New member
"I've changed the points,
"I've changed the points, condensers. #1 coil has weak spark, #2 is strong. When I swap feed wires for the coils, the condition is reversed. Both points are set at about .020", but is hard to measure because the plate they attach to has side to side play(quite a bit of play). I had this problem before I changed the parts and is why I replaced them. Any ideas?"
"I've changed the points, condensers. #1 coil has weak spark, #2 is strong. When I swap feed wires for the coils, the condition is reversed. Both points are set at about .020", but is hard to measure because the plate they attach to has side to side play(quite a bit of play). I had this problem before I changed the parts and is why I replaced them. Any ideas?"
