Logo
FULL SITE MENU

Showa Trim/Tilt leaking

C

ColinW

Member
Hello,
I have a bf150 and the trim/tilt is giving me trouble. It’s leaking where the bleed screw housing meets the main unit. I’ve removed it more times than I’d like to admit. The 5 O-rings are new. I’m getting close to swapping the O-rings for bigger ones.
Does anyone have experience with this?
 
In case anyone comes across this in the future. Issue fixed. Leaking may have been caused by a missing O-ring that hides under a metal circle thing. Parts diagrams do not show it. There are 6 O-rings in that area, not 5. I also replaced the other five with thicker HNBR green O-rings from a kit bought at Napa
 
Nope. It’s inside that small round metal piece that sticks out near the bottom left. I suggest not using the orings that are suggested. Get the Napa kit.
 
ColinW said:
Hello,
I have a bf150 and the trim/tilt is giving me trouble. It’s leaking where the bleed screw housing meets the main unit. I’ve removed it more times than I’d like to admit. The 5 O-rings are new. I’m getting close to swapping the O-rings for bigger ones.
Does anyone have experience with this?














Hey all! I discovered a psychic reader and advisor https://psychics-advisor.com/ while reading a forum about finding clarity during tough times here in the USA. I was curious and decided to give it a shot, and I’m so glad I did. The session felt personal and insightful, almost as if the advisor knew exactly what I was going through. The advice was actionable and helped me stop overthinking things. It felt like talking to someone who genuinely understood my concerns.
Click to expand...
Hello! It sounds like you're dealing with a frustrating issue with your BF150 trim/tilt system. Leaks can be tricky, especially when you've already replaced the O-rings. Here are some insights and suggestions based on common experiences with similar problems:Common Cau
 
Back
Top