andreboats
New member
[FONT=Verdana, Arial, Helvetica][FONT=Verdana, Arial, Helvetica]I have a 2007 Doral 8.1OSI whit SX drives.
It has separate Forw. rev. shifters and throttles.
When engine is not running there is no problem whit the shifters, but when engine is running, the port shifter is really stiff just before I try to get back into neutral from forward or reverse...
Can this be a cable problem on a 07 boat (2 years of salt water)??
Why only when engine is running??
Any other ideas would be appreciated.
Thanks.
[/FONT][/FONT][FONT=Verdana, Arial, Helvetica]André[/FONT]
It has separate Forw. rev. shifters and throttles.
When engine is not running there is no problem whit the shifters, but when engine is running, the port shifter is really stiff just before I try to get back into neutral from forward or reverse...
Can this be a cable problem on a 07 boat (2 years of salt water)??
Why only when engine is running??
Any other ideas would be appreciated.
Thanks.
[/FONT][/FONT][FONT=Verdana, Arial, Helvetica]André[/FONT]