Logo

Replace vro with fuel pump

gneg1056

New member
"For a 1984 90 hp Evinrude E90

"For a 1984 90 hp Evinrude E90TLCRD, can you tell me if it's possible to replace the vro pump with a fuel only pump? If so what year / model fuel pump would I use? The condition of the fuel diaphram in the vro pump is suspect, and I'd rather mix the gas and oil myself anyway."
 
"If the pump doesn't come

"If the pump doesn't come with the screws, you would need 2 of #314417 screws.

Fuel pump numbers below are the opriginal part number, followed by the superseding numbers up to the final present part number. Any of those pump numbers would work fine for you.

1 - Gasket 303615
1 - Fuel Pump #394227, 394708, 395716, 398386, and finally 438553.

Thousands of parts in my remaining stock. Not able to list them all. Let me know what you need and I'll look it up for you. Visit my eBay store at:

http://stores.ebay.com/Evinrude-Johnson-Outboard-Parts-etc?refid=store"
 
"Joe,
Thanks for your reply.


"Joe,
Thanks for your reply.
On this site, p/n 398386 is a $38 part, the present p/n 438553 is $124. Are these both the same pumps? Why such a big difference in price?"
 
438553 in my book is about $50

438553 in my book is about $50.00. I have no idea why it staes the higher amount elsewhere. Stay with the 398386.
 
The V6 requires two (2&#41

The V6 requires two (2) fuel pumps connected in series: Tank to pump-1 to pump-2 to carburetors.
 
Back
Top