WhoIsHayley
New member
Hi everyone, I'm new here and this is my first post. It' probably going to sound a bit odd amd might even be impossible to answer.
Does anyone have any guesitmate information on the RPMs for idle, trolling, cruisng and redline for 318 Chrylsers manufactured in the late 60's early 70's?
I'm guessing the idle was about 800-900 RPM. The trolling at about 2000 RPM, cruising 3500 RPM and Redline at about 6000 RPM? But all guessing from my dads Le Baron
Here is the reason:
I'm in the process of converting a 30ft Tolly sport cruiser to a fully electric boat.
The motors are pulled and the electric motors are ready for fitting. I just need to confirm old RPMs to match set up the gearing ratio on the electric motors.
Thanks in advance
B
Does anyone have any guesitmate information on the RPMs for idle, trolling, cruisng and redline for 318 Chrylsers manufactured in the late 60's early 70's?
I'm guessing the idle was about 800-900 RPM. The trolling at about 2000 RPM, cruising 3500 RPM and Redline at about 6000 RPM? But all guessing from my dads Le Baron
Here is the reason:
I'm in the process of converting a 30ft Tolly sport cruiser to a fully electric boat.
The motors are pulled and the electric motors are ready for fitting. I just need to confirm old RPMs to match set up the gearing ratio on the electric motors.
Thanks in advance
B