Logo
FULL SITE MENU

Question on a 1966 3 hp JW-21

D

duckybud

New member
Did these motors come out with a fuel pump? I have one with a fuel pump and can't find a replacement or repair kit. I only plan on running on the internal tank, mine also has a connection for a remote tank. If the pump isn't needed how can I remove it and plug the port?

Thanks for any help
duckybud
 
There was an optional fuel pump to run with a bigger tank.--------Finding / making a replacement diaphragm should be extremely easy for whatever pump is now on your motor !!----Pictures ?--Don't want to do that ?---------Just remove the pump and find the threaded fitting for the pulse port .--------------Or find a small piece of steel / aluminum plate.--------Drill 2 holes and blank off the location for the pump.
 
Thanks, racerone, was hoping it could be removed. You are saying the pluse port will be threaded, correct? If not I will make a block off plate.

duckybud
 
Last edited:
These motors left the factory prepared for the optional pump.-----------The pulse port was threaded.-------Had a plug 307272 in it.---------Now they are very proud of this plug as in $$$ wise.---------Should not be hard to plug it with an alternate part or just leave it on there.
 
Last edited:
Wondering....... Why do away with that option? Just close off the external tank valve and use the engine's fuel tank.
 
Back
Top