Pulley trouble

[diver_dave]

"I see that the original coola

"I see that the original coolant pump pulley (2 slot) has been replaced with a new part number, a 3 slot pulley. Trouble is, on my Gen IV, 454's, the new pulley will interfere with the oil hose coming out of the U cooler. Does anyone have a way around this issue?"

 

[makomark]

"If there's enough slack i

"If there's enough slack in the oil lines, you could fab a new bracket to hold the oil cooler or just use a plate to extend what's already there. shouldn't have to move more than 3/4"."