Logo

Propellers for Dana 90 drives

garmo

New member
Hi Guys. I am looking for propellers for Dana 90 outdrives, prefferably 17x15, both left and right. Do any of you have or know anybody else who has these?

I am also told Mercury props were the same thing. I need SMC 733 and SMC 734 props.

Do any of you know of a used prop dealer?
Thanks,
Gary
 
I have a 300 leg and the prop splines are the same as some of the merc props. 16 for memory. A Merc can fit and operate on mine 300 but a 300 can not operate on a merc. Where are you located? There was some one advertising in Canada with some Dana props. Mercs should be easier to locate. You have some research ahead of you. The 300 spun a max of 16 inches.
 
I am in SW Colorado. Excuse my ignorance, but what is a 300 leg?

Do you happen to have a link to the props in Canada you mentioned?
 
CHRYSLER made their own leg, the 300 STERNDRIVE LEG ,previously used rebadged Volvos. The Canadian props were ones that were advertised on one of those free sites. I will see if i had saved it to my computer. If you have some props on your Dana legs i would suggest you go to a merc/mercruiser dealer/wrecker and establish if mercs fit Dana drives. I do not know much about Dana Drives.
 
Gary if you are honestly looking for props for a Dana you should pick them up soon ... One of my suppliers was the only one in the country havin Dana props made for them, and the company making them for them dropped the props due to issues getting hubs I guess So when they are gone they are gone ( not a good deal going forward but that's the story I have been hearing.. thru the summer the props in inventory have been falling fast. I just checked and we have 1 left and 1 right left in the 17x15 size .. My suggestion is if you really want a set I wouldn't wait till spring or I am sure they will be gone.. I'm not trying to sell you .. just being honest.

Oh and Coaster mentioned the Merc props.. YES they do fit on the splines of the 300 BUT you need a custom prop spacer to use them .
 
Back
Top