Power pack to ignition coil

[scott53594]

Hello it's me again... is there a method to test the trigger wires from the power pack to the ignition coil without special equipment on a 99 Johnson 50 HP

 

[PhilSch]

You need a DVA adapter hooked to a multimeter set on DC...https://www.amazon.com/gp/product/B0093U3TFG/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

When wires are connected to the coils (use piercing probes) you should get at least 150 volts.