First off I think I've read every thread on the net about this to no avail for me. I'm also not feeling all that well and don't know how clear of a mind I have. So I figured I'd better ask before I break something. Trying to get The power head off a 1989 50 hp.. I've taken the five 3/8 bolts out on the top. Two on the port side and three on the starboard. Two long 5/16 bolts from underneath for the front of the exhaust tube. Two 3/8 nuts for the rubber shock absorbers. Also took off the mounting plate for the carb choke selonoid and any bolts acessable under that. I can move it around a little bit. Is there any other hidden bolts I'm just not seeing or is it just the exhaust gasket holding in on. If it's just the gasket then how in tarnation are you supposed to pry on it. Nothing to get a purchase on without fear of breaking something. I'm almost ready to try hooking up a come along to the ceiling and try that. Just don't know which bolts to us as there is no lifting hook on the block. Thanks.