please help 1971 evinrude 60 no spark

[grounded4life]

first off let me just say this my first boat never been around them so i have no experience in this field...got boat from my father got it home it spun over no fire i cleaned off all connection on what i belive is the main connection block as they were corroded then she fired right up she ran for about 10 mins then died and no fire to any of the plugs any help is greatly appreciated as i would like to get in the water sometime soon

 

[racerone]

You will need to pull the flywheel , remove distributor cap , clean and set points to 0.010 ", clean distributor cap and rotor , inspect replace the anti reversing spring that is in there.------These are " no cost steps " and you might as well do them.--------If still no spark then you might have to spend some serious money.

 

[grounded4life]

thanks ill give that a try tomorow and see if that helps