parting out marine chrysler 318.

[sammi]

I have a late 1970's chrysler 318 marine engine that I have been parting out. the block cracked. there is the block, cam and crankshaft, heads, pistons, flywheel, oilpan, distrubutor,and bellhousing. is there any real value to it or should i take it to the local scrap metal facility. Any idea a ball park figure on scrap value?

 

[fastjeff]

All someone needs to make it go again is another block. I'd advertise it and wait a while.

Jeff

 

[300hb]

Oil pan and bell housing are NLA and should not be scrapped. Heads, intake, starter and distributor are worth trying to sell. A short block with crank, cam, pistons can be bought new.


Jack

 

[pismo10]

I'll take the cam..

 

[sammi]

the guy who bought the boat it came out of took alot of parts from it so it isnt complete anymore. starter, carb, intake are gone. I have already sold the raw water pump. the parts that i think may have some value are distrubuter,crankshaft, heads, oil cooler, camshaft, oilpan and bellhousing. I dont know.

 

[greasemonkey]

1.heads 200 -300
2.oilpan 100 200
3.bell housing 100-200
4.camshaft if its a reverse maybe somethin
5.distributor maybe 50-100
6.flywheel 100-200
7.crankshaft 100-300

If you did it right you could get 700 -1000