Omc sterndrive with GM 5.7L V8 propeller

[gel1122]

Just wanted to know what hub kit I would need to put on the new propeller I know its a low profile lower electric shift

 

[hystat]

hub kit?
no hub kits available that I can think of.

propco are the only ones making propellers for the electric shift OMC's pin drive propshaft
http://www.propcopropellers.com/omc.htm

 

[gel1122]

hub kit?
no hub kits available that I can think of.

propco are the only ones making propellers for the electric shift OMC's pin drive propshaft
http://www.propcopropellers.com/omc.htm

Just wanted to know if I am using the right prop its a 14 x 19 its a 24 f boat v bottom and with the last prop which was also 14 x 19 that the marina installed in april but all of sudden came off 2 days ago at about 2700rpm I would cruise at 17mph but anything higher it would seem to slip shouldn't I be able to achieve a higher mph? Is there something else I need to replace besides the entire boat?

 

[hystat]

I don't think you can buy or replace the hub anymore- you'll need a new prop