chargersteve
New member
I recently bought a 1984 Charger 170 boat with a 1984 Mercury 115 inline 6 Serial # 65xxxxx. I replaced the stator(wires had rotted in half) and the starter(did voltage test) new one works old one didn't. The boat has not been started in 10+years. I also replaced two wires from what I believe to be the rev limiter(it was a rectangular box 3"x2" on the inside of the front plate with 3 wires running to the switchbox.) It has a new deep cycle battery. I have the correct ohms readings on the stator and trigger wires but have no voltage anywhere on those wires. I have voltage at the rectifier and can't detect any at any other place. Any ideas on what to check or should I head to the boat shop so they can put it on the analyzer? Thanks